Workshop Welding Machines
the ” PL ” series belong all hydraulically operated , computer controlled workshop machines with printer for the recording of all parameters relative to the
butt welding of pipes and fittings in PE , PP, PVDF and other thermoplastic materials.
Pivoting clamps allow for the fabrication of segmented bends of different radius.
Upon request, these machines can be supplied with special gigs ( device ) for the fabrications
of 90° Tees and Crosses , as well as 45° and 60° Laterals
PL …. C
Manually (PL 125 e PL 160) and Hydraulic (PL 315 C e PL 400 C) operated butt welding machines suitable for PE,PP,PVDF and other thermoplastic materials pipes and fittings.
The pivoting clamps allow the construction of segmented (lobster back) bends in different radius .
By means of the adjustable cross slide on the fixed trolley it’s possible to have always the perfect alignment.
The electric facing tool has the cross slide adjustable in order to mill always into the pipe’s centre.
Hydraulic operated butt welding machines suitable for PE,PP,PVDF and other thermoplastic materials pipes and fittings.
These machines can be supplied ( on request ) with Tees and Crosses Devices for fabrication of 45° , 60° , 90° Tees.
Electronic thermostat on the mirror and connection for the LDU (data logger) with the circuit.
Machines , according to CE specifications.
PL …. CNC
CNC operated butt welding machines suitable for PE,PP,PVDF and other thermoplastic materials pipes and fittings.
The CNC control provide the following main functions:
– Assist the operator during the welding cycle
– Check and control the welding parameters during the welding cycle
– At the end of welding cycle print the welding report
While set up the welding data and positioned the pieces to be welded , the CNC control will carry on the welding cycle
The Welding data to be set up are: Material Type , Diameter , Wall Thickness or SDR , Welding Standard ( DVS, ISO , WIS , ISO HP , etc )
The database related to the welding can be transfer to a PC by means of using the Software supplied
The pivoting clamps allow the construction of segmented (lobster back) bends in different radius.
By means of the adjustable cross slide on the fixed trolley it’s possible to have always the perfect alignment.
The electric facing tool as well has the cross slide adjustable in order to mill always into the pipe’s centre.
These machines can be supplied ( on request ) with Tees and Crosses Devices for fabrication of 45° , 60° , 90° Tees.
Machines , according to CE specifications.
MODELS PL:
- PL 125
- Bends Range: 25 – 125mm
- PL 160
- Bends Range: 40 – 160mm
- PL 315 C
- Bends Range: 90 – 315mm
- 45°,60*,90°Tees & Cross 90 – 250mm
- PL 315 CNC
- Bends Range: 90 – 315mm
- 45°,60*,90°Tees & Cross 90 – 250mm
- PL 400 C
- Bends Range: 90 – 400mm
- 45°,60*,90°Tees & Cross 90 – 315mm
- PL 400 CNC
- Bends Range: 90 – 400mm
- 45°,60*,90°Tees & Cross 90 – 315mm
- PL 500 CNC
- Bends Range: 250 – 500mm
- 45°,60*,90°Tees & Cross 250 – 400mm
- PL 630 CNC
- Bends Range: 315 – 630mm
- 45°,60*,90°Tees & Cross 315 – 630mm
- PL 800 CNC
- Bends Range: 315 – 800mm
- 45°,60*,90°Tees & Cross 315 – 630mm
- PL 1000 CNC
- Bends Range: 355 -1000mm
- 45°,60*,90°Tees & Cross 355 – 800mm
- PL 1200 CNC
- Bends Range: 630-1200mm
- 45°,60*,90°Tees & Cross 630- 900mm
- PL 1201 CNC
- Bends Range: 630-1200mm
- 45°,60*,90°Tees & Cross 630-1000mm
- PL 1600 CNC
- Bends Range: 900-1600mm
- 45°,60*,90°Tees & Cross 900-1200mm
- PL 1601 CNC
- Bends Range: 900-1600mm
- 45°,60*,90°Tees 900- 1600mm
- PL 2000 CNC
- Bends Range: 1200-2000mm
- 45°,60*,90°Tees 1200- 2000mm
Workshop hydraulic operated saw machine
suitable for PE,PP,PVDF and other thermoplastic pipes. Excellent complement to our PL workshop machines.
Adjustable cutting angle to cover all your fittings construction needs
Our ST machines are equipped with pneumatic cylinders for clamping the pipes, rollers for pipe sliding and adjustable blade speed.
ST Models:
SDI Reducing Tees Fabrication Machines
Manual and Hydraulic operated butt welding suitable for Reducing Tees fabrication , by means of using two different systems
First one is to weld a smaller pipe into the main pipe by using concav and conves bushes especially designed for this purpose
sthree clamps repairing machines suitable for PE,PP,PVDF and other thermoplastic materials pipes and fittings.
The second one is the MKM ® System ,The simplest and most economical way for making derivation joints in PP and/or PP pipes.
Simplicity in use with the use of a bench welding machine the joint is brought into contact with the pipe and welded perfectly. Thanks to the elliptical shape the welding is performed in an even manner over the entire surface.
Reduction of stocks from now onwards the size of the stocks in the warehouse can be reduced by up to 80% thanks to the simplified shape of the derivation joints.
High standard of strength laboratory test done on the derivation welds have demonstrated a very high strength in conformity with international standards.
Applications in various fields irrigation, solar heating, low-temperature heating, refrigeration systems, aqueducts, chemical industries and transport of liquids under pressure.
MKM ® is patented
ITS – Tecnodue. offers several solutions of machines suitable for jthe above Reducing Tees fabrication
The hydraulic operated machines expressly studied for the MKM fittings in large diameter, several models available covering a range of main pipe up to 1200mm.
SDI 315
Main Pipe Range 90mm – 315mm
Derivation Range 63mm – 160mm
Voltage 230V 50Hz
Power comsumption 2,0 KW , 1o A
SDI 630
Main Pipe Range 355mm – 630mm
Derivation Range 90mm – 315mm
Voltage 230V 50Hz
Power comsumption 4,5 KW , 21 A
SDI 1200
Main Pipe Range 250mm – 1200mm
Derivation Range 160mm – 315mm
Voltage 400V 50Hz
Power comsumption 6,7 KW , 36 A
IMPORTANT !
MACHINES DO NOT INCLUDE PTFE CONCAVE AND CONVEX COATED BUSHES.